(520)780-9751
Have questions about
our products?
Speed Bumps | Speed Humps | Car Stops
Rubber speed bumps have several advantages over asphalt — price being first and foremost. Secure Lane has great pricing on speed bumps. Quantity discounts are huge! Call for your price (520)780-9751. If you have a parking lot or a long private road to your property, you may need multiple speed bumps, making a reasonably priced speed bump of particular importance.
Rubber speed bumps can be installed in less than an hour, so paying a contractor to do the job won’t mean saving up for decades. The speedbumps are straightforward to remove as well, so they can even be moved from place to place on an as-needed basis. Our rubber speed bumps have reflective surfaces and makes your traffic calming devices stand out from the road — essential at night.
- Our Speed Bumps and End Caps are made of 100% post-consumer recycled tire rubber from used car and truck tires. A 3% MD400 polyurethane is used as a binder.
- Speed Bumps have a 1/8” virgin rubber overlay resulting in a 92% recycled content. The yellow stripes are made from road marking tape. Optional cat eye reflectors are for nighttime visability. There are 8 per 6’ speed bump, they are a highly reflective glass bead and have never been reported to come out.
- These 60 pound rubber speed bumps are light enough for easy installation by a single installer.
- Made in the USA. For each 12 lbs of product you buy saves one passenger tire from a landfill.
- Hardware installation holes are drilled with a ½” drill bit.
- Hardware available: 14” x 1/2” rebar spike with 5/8” washer for asphalt or gravel installations.
- 4 1/2” x ½” lag screw, washer and short shield for concrete installations.
- Use 10 ounce of epoxy or construction adhesive (ie Polyurethane PL Premium) for installations where no hardware is allowed.
End Cap
Alabama · Alaska · Arizona · Arkansas · California · Colorado · Connecticut · Delaware · Florida · Georgia · Hawaii · Idaho · Illinois · Indiana · Iowa · Kansas · Kentucky · Louisiana · Maine · Maryland · Massachusetts · Michigan · Minnesota · Mississippi · Missouri · Montana · Nebraska · Nevada · New Hampshire · New Jersey · New Mexico · New York · North Carolina · North Dakota · Ohio · Oklahoma · Oregon · Pennsylvania · Rhode Island · South Carolina · South Dakota · Tennessee · Texas · Utah · Vermont · Virginia · Washington · West Virginia · Wisconsin · Wyoming
Q. Where can I use a speed bump?
A. Anywhere from directing traffic for school crossings, to controlling traffic during school or public fairs, to slowing traffic down for church attendees, to controlling fans from leaving athletic events, or even law enforcement directing traffic when there is a change in traffic patterns.
Secure Lane LLC Copyright © 2013 Secure Lane LLC, All Rights Reserved | Tucson, AZ USA (520)780-9751 Contact the webmaster at: [email protected]
Recycled Rubber Speed Bumps
- Manufactured from 100% recycled rubber tires.
- Superior construction ensures that this speed bump will not warp, crack, or chip.
- Easy handling and storage. Easily installed by one person.
- Resistant to ultraviolet light, moisture, oil, and extreme temperature variations.
- Flexible design allows conformity to the contour of virtually any road surface.
- Maintenance free.
- Highly Visible and Slows traffic which contributes to a safer environment.
- Ideal for indoor and outdoor parking areas.
- The bumps are available in length of 4 or 6 Ft. sections - 2 5/8" High X 12" Wide
- Designed to slow cars down to 5 MPH
- Weight limit per axle: 10,500lbs
- Resistant to warping, cracking, chipping and rotting
- Flexible and capable of conforming to irregularities in paving surface
- Finish: black body with yellow reflective parallelogram stripes (not painted on but molded from highway tape into rubber)
- Cat eye reflectors imbedded for additional reflectivity
- Channels at the bottom of 1.25 x 1.25 for drainage, piping and cabling.
Hardware installation holes are drilled with a ½ drill bit.
Hardware available:
14" x ½" rebar spike with 5/8" washer for asphalt or gravel installations.
4 ½" x ½" lag screw, washer and short shield for concrete installations.
Use 10 ounce of epoxy or construction adhesive (ie Polyurethane PL Premium) for installations where no hardware is allowed.
Recycled Rubber Speed Humps
- Tough, recycled tire rubber is resistant to weather, salt, moisture, UV, oil, and temperature.
- Made in the USA.
- Prompt shipping.
- Will not warp, chip, or crack.
- Easy, one person installation (instructions included).
- Installation hardware is available.
- Lightweight, Dependable, Affordable!
- Removable for surface maintenance, snow plows or to relocate at a new site.
- Molded-in yellow road marking tape stripes.
- Use adhesive and hardware if 4+ trucks a day (keeps hardware from working loose).
- Dual bottom channels for drainage, wire or pipe to 3/4”.
- Male/Female joints on each section.
- Use multiple sections to cover width needed!
- 6 predrilled holes for hardware per section.
- Withstand heavy traffic
- Reduces vehicle speeds to 10-15 mph
Hardware installation holes are drilled with a ½ drill bit.
Hardware available:
14" x ½" rebar spike with 5/8" washer for asphalt or gravel installations.
4 ½" x ½" lag screw, washer and short shield for concrete installations.
Use 10 ounce of epoxy or construction adhesive (ie Polyurethane PL Premium) for installations where no hardware is allowed.
Recycled Rubber Parking Lot Wheel Stops
Parking Curbs - Car Stops help ensure vehicles stop at the proper location when parking preventing damage to buildings, sidewalks, curbs and delicate landscape. Inside, they function as bumper cushions and protection for motorized carts, forklift trucks and vehicles operating in factories and warehouses.
Ideal for retail/commercial/business parking lots, parking garages and municipalities, wheel stops provide needed order by delineating parking spots and ensuring proper distancing.
Sold in 3 Foot, 4 Foot or 6 Foot Lengths
- ST-6' 4 holes, 8 stripes, 40 lbs.
- ST-4' 3 holes, 4 stripes, 30 lbs.
- ST-3' 2 holes, 4 stripes, 20 lbs.
Permanent reflective striping - no painting!
Reflective stripes are made of road marking tape. Bonded stripes are available in yellow, white, blue or none
Ideal for parking lots, garages, wall protection, and other parking applications.
Hardware installation holes are drilled with a ½ drill bit.
Hardware available:
14" x ½" rebar spike with 5/8" washer for asphalt or gravel installations.
4 ½" x ½" lag screw, washer and short shield for concrete installations.
Use 10 ounce of epoxy or construction adhesive (ie Polyurethane PL Premium) for installations where no hardware is allowed.
The 4” posts are made of non-brittle, low-density plastic and have two white 3”, high intensity, ultragrade flexible, reflective bands.
42"
28"
42" High Post with 15 lb Rubber Base....$28.00 each
28" High Post with 15 lb Rubber Base....$25.00 each
Minimum Order of 60 units
Check out our new websites!
& our home site
Speed Bumps are in stock!!