(520)780-9751
COBRA™ Surface Mount Traffic Spike System
3’(914.4 mm) Section
¼” Hot Rolled Steel Top Plate
KING COBRA™ Surface Mounted Heavy DutyTraffic Spike System
COBRA™ & KING COBRA ™ Replacement Parts
COBRA™ In Ground/Flush Mount Traffic Spike System
COBRA™ & COBRA HD™ Replacement Parts
Traffic Spikes
- Traffic control spikes are ideal for controlling traffic direction and speed through a controlled entry location or parking lot.
- Traffic spikes prevent vehicles from proceeding through a traffic lane in the wrong direction by enforcing one-way traffic lanes.
- Flush mount spikes and surface mounted spikes are available with Spring Retraction or Weighted Retraction. Counter Balance or Counter Balance with a Spring Assist
- Speed bumps should always be used with traffic spikes to force drivers to slow down while driving through the controlled entry point.
- Speed Bumps control vehicular traffic to a safe and required 5 MPH speed while driving over parking lot traffic spike strips.
3’ (914.4 mm) Section
3/8” Hot Rolled Steel Top Plate
Stainless Steel Springs, Teeth, & Latch Down Assemblies, End Bevel Cap Set and much more
3’ (914.4 mm) OR 6’ (1828.8 mm)
1/4" Top Plate
Teeth, Torsion Springs, Bearing Blocks & Latch Down Assemblies
Traffic spikes are ideal for controlling traffic direction and speed through a controlled entry/exit location or parking lot. Traffic spikes prevent vehicles from proceeding through a traffic lane in the wrong direction by enforcing one-way traffic lane direction.
Often referred to as Tiger Teeth Traffic Controllers.
COBRA HD™ Heavy Duty In Ground/Flush Mount Traffic Spike System
3’ (914.4 mm) Section
3/8″ Top Plate
Alabama · Alaska · Arizona · Arkansas · California · Colorado · Connecticut · Delaware · Florida · Georgia · Hawaii · Idaho · Illinois · Indiana · Iowa · Kansas · Kentucky · Louisiana · Maine · Maryland · Massachusetts · Michigan · Minnesota · Mississippi · Missouri · Montana · Nebraska · Nevada · New Hampshire · New Jersey · New Mexico · New York · North Carolina · North Dakota · Ohio · Oklahoma · Oregon · Pennsylvania · Rhode Island · South Carolina · South Dakota · Tennessee · Texas · Utah · Vermont · Virginia · Washington · West Virginia · Wisconsin · Wyoming
Every Traffic Spike Product on this page is Made in the USA!
RB72-3 Directional Traffic Spike Controller
Flush Mount Application
The flush mount directional spike system offers the
same features as the surface mount; however, it is
designed to sit flush with the road surface. This
system is ideal for permanent installations.
Model RB72-3
• System is installed flush with the road surface
for a low profile, allowing smooth passage.
• Easily installed to the existing or newly constructed
roadway.
• Minimal excavating or asphalt cutting is required.
• Low profile for smooth passage.
• Fabricated in 3 Ft.sections to customize lane width.
• All welded construction.
• 1/2" thick hot rolled steel for "lasting durability".
Model RB-36
Latch Down Mechanism Included
Surface Mount Application
The directional spike system is used to control traffic in one direction. Vehicle may enter, but not exit without severe tire damage. Spring loaded spikes remain up and easily go down when vehicles pass over the system in the correct direction; however, if passing over it in the opposite (incorrect) direction, all tires will be sliced.
• Surface mounted spike system also serves as a
speed bump to slow down the flow of traffic.
• Easily installed to the existing roadway.
• No excavating or asphalt cutting is required.
• Low profile for smooth passage.
• Fabricated in 3 Ft.sections to customize lane width.
• All welded construction.
• 1/4" thick hot rolled steel for "lasting durability".
COBRA Traffic Spikes
1610 Series Directional Traffic Control Spikes
Model 1610 Flush Mount Traffic Spikes
- Individual spring loaded spikes.
- Stainless steel springs.
- Weight spikes (no springs) version available.
- Lock-down version available.
- Flush in-ground unit.
- Painted bright red for easy visibility.
- Ideal to enforce one-way traffic.
- Dimensions: 6.5"H x 12.5"W x 72"L.
Warning signs must be used with traffic spikes to warn drivers that a one-way traffic lane condition exist.
- Speed bumps should always be used with traffic spikes. Speeds in excess of 5-MPH over the spikes can cause tire damage.
Road Blade™
Tiger Teeth Directional Traffic Control Spikes
Model 1610 Surface Mount Traffic Spikes
- Spikes sections available in 3-foot sections.
- End caps provide a smooth end to the spike section.
- Torsion springs.
- Lock-down standard.
- Surface mount unit.
- 1/4-inch diamond plate painted bright yellow for easy visibility.
- 3-inch rise provides a built-in speed bump.
- Dimensions: 3"H x 31"W x 36"L.
- Warning signs must be used with traffic spikes to warn drivers that a one-way traffic lane condition exist.
- Speed bumps should always be used with traffic spikes. Speeds in excess of 5-MPH over the spikes can cause tire damage.
- Warning signs must be used with traffic spikes to warn drivers that a one-way traffic lane condition exists.
- Speed bumps should always be used with traffic spikes. Speeds in excess of 5-MPH over the spikes can cause tire damage or damage to spike systems.
Surface Mounted Traffic Spikes can be glued to the road surface with a construction grade epoxy or they can be anchored with bolts to the road surface
It is the end users responsibility to check with local authorities for permission to use traffic spikes for their intended use.
This is one design that has been popular for years in the traffic spike industry. It is often renamed and copied by others. Some of the names are Tiger Teeth, TT36, TT72, etc. The RB-36 & RB-72-3 traffic spike are Made in the USA.
HEAVY AXLE LOAD RATED
HEAVY AXLE LOAD RATED
Don't forget to call for your discount for quantity, contractors, military, church, school and other discounts you may qualify for. No obligation cost estimate can be emailed to you today! (520)780-9751 or [email protected]
Please visit our other website too!
The Winter Season is coming soon!
Be sure to ask about a stainless steel snow and ice melt cable system for your spikes. Works with any of our spikes and is controlled by a digital thermostat.
Secure Lane LLC Copyright © 2013 Secure Lane LLC, All Rights Reserved | Tucson, AZ USA (520)780-9751 Contact the webmaster at: [email protected]
18" X 24"
22" X 28" with frame
Ramps and Plates are Double Layer Powder Coat - Safety Red
Teeth are Double Layer Powder Coated - Yellow
Road Blade In Ground / Tiger Teeth Directional Traffic Control Spikes
Road Blade Surface Mount / Tiger Teeth Directional Traffic Control Spikes
1/2" Thick Plate Super Heavy Duty Axle Load Rated
SUPER TOUGH!
Installed Flush with the roadway. Low Profile In Ground Traffic Spikes for sports car clearance.
VIPER™ Low Profile Surface Mount Traffic Spike System
Overall height of ramp & spikes is 3.44"
Now that's low profile sports car safe!
Epoxy to
Asphalt
Bolt to
Concrete
Concrete
In Stock!
Parts are still available. We have tons of springs!
Base Box and Plates are Double Layer Powder Coat - Safety Red
Teeth are Double Layer Powder Coated - Yellow
WE HAVE SPRINGS FOR THE COBRA SPIKES!!